WEB WIRE MESH can offer filter elements and filtration meshes used in production of sulphur processing for the sulphuric acid industry as well as activities in sulphur re-processing and sulphur forming.

Why do you need filter molten sulphur?

Generally, the solid sulphur is stored in open-air venue, where all the products will collect dust and dirt from the surrounding environment. So before using liquid sulphur, it must use effective filters to remove contaminants, such as ash and bitumen to protect downstream equipments. The removal of solids from molten sulphur is generally done using pressure filter leaves.

Why do you need remove sulphuric acid mist?

Sulphuric acid mists are formed at various processes of the sulphuric acid production, if not remove these mists, they will carry the gas stream through the downstream equipment of the sulphuric acid plants, this result in corrosion of ducting, blowers, heat exchangers and vessels which inside the plants, and an environmental menace outside. Thus, most sulphuric acid plants installed mist eliminator in drying, intermediate, and final absorption towers.

The use of mist eliminator in sulfuric acid plant:

Drying towers: Commonly use mist eliminators. The other option is to use the fiber bed mist eliminators.

Absorption towers: Commonly use fiber bed mist eliminators.  

Tail gas scrubbers: Fiber bed mist eliminators can reduce SO₂ emissions.

Benefits

Prevent damage to downstream equipment

Recover valuable acid from the gas stream

Decreases maintenance costs

Avoid undesirable atmospheric emissions, reduction of contamination

Products

Filter leaves

Demister pads

Fiber bed mist eliminator